Hi Joe,
I was assuming you were not able to guide with the relay port on the Gemini at all and were using the serial (RS232) connection in PHD for both Goto & Guiding.
I'll have to look through some old notes of mine with configuration parameters when I was using the Gemini-1 with Astroart 4 & 5 and see if there is something I can help with.
Best Regards,
Bill
Full Frame Focus Exposure Time By Filter
Re: Full Frame Focus Exposure Time By Filter
Bill,
Thanks for your help on this.
Joe
Thanks for your help on this.
Joe
Re: Full Frame Focus Exposure Time By Filter
Fabio,
At my dark site imaging! I still can’t get the auto-guider to calibrate and the mount doesn’t move when AA8 is trying to calibrate. I’m running the output of the QHY guider to the autoguider port of the Gemini 1. I want to note that I don’t have the Camera 2 options in the pull-down menu. Could it be I don’t have the correct drivers?
Thank again for the help!
Joe
At my dark site imaging! I still can’t get the auto-guider to calibrate and the mount doesn’t move when AA8 is trying to calibrate. I’m running the output of the QHY guider to the autoguider port of the Gemini 1. I want to note that I don’t have the Camera 2 options in the pull-down menu. Could it be I don’t have the correct drivers?
Thank again for the help!
Joe