Page 1 of 1

Bayer

Posted: 10 Oct 2021, 08:38
by Morten Lerager
Hi'
First post. Until now i have been using Siril.
My setup is HEQ5 Pro with SW 150PDS/ f5. 60mm guide cam
Main cam DSLR eos 2000D guide system Lacerta

Now trying AA8 hopeful :)
I'am not sure to set Debayer right when preprocess. When i process in Siril i get a log saying the format is GBRG

Canon 2000D
More here https://www.libraw.org/node/2603 (I don't know if AA are using libraw)
And inside PI https://pixinsight.com/forum/index.php? ... cut.13249/

So which mode should i choose ?
Morten Lerager

Re: Bayer

Posted: 10 Oct 2021, 17:40
by Dunmunro
Morten Lerager wrote:
10 Oct 2021, 08:38
Hi'
First post. Until now i have been using Siril.
My setup is HEQ5 Pro with SW 150PDS/ f5. 60mm guide cam
Main cam DSLR eos 2000D guide system Lacerta

Now trying AA8 hopeful :)
I'am not sure to set Debayer right when preprocess. When i process in Siril i get a log saying the format is GBRG

Canon 2000D
More here https://www.libraw.org/node/2603 (I don't know if AA are using libraw)
And inside PI https://pixinsight.com/forum/index.php? ... cut.13249/

So which mode should i choose ?
Morten Lerager
RGB.JPG
I find the quickest way to decide which pattern to use it to test the output with an image of M42; the correct choice is easily recognized. You could also image a terrestrial test target to see which is the best match.

Re: Bayer

Posted: 10 Oct 2021, 19:45
by Morten Lerager
Thank you
Oki I hope to find my lens, and try a terrestrial test.
I was hoping AA had some auto recognition like others.

Re: Bayer

Posted: 10 Oct 2021, 21:19
by fabdev
Hi, to auto-recognize the pattern there's also the button "Open <firstfile>" in that dialog window, the button becomes visible once some files are selected in the Images box. At the moment there is no recognition (25% 25% 25% 25%) because no images were opened from disk. Once that is done, probably the third value will be highlited for the EOS 2000.
The setting will be remembered for future preprocessings.
Fabio.