Selected guide star not showing in Guide Window

Cameras, telescopes, focusers and other hardware
Post Reply
mpmayer0416
Posts: 4
Joined: 09 Sep 2022, 15:46

Selected guide star not showing in Guide Window

Post by mpmayer0416 » 15 Oct 2022, 12:54

I’m using a QHY5iii485 guider cam and trying to do auto guiding in AA 8 SP2 with the ASCOM camera setup. As shown below, when I select a star in the guide camera image it’s not showing up in the Guide Window. It used to show up as it should. Something has changed somewhere and I’m having no luck solving this issue. Your help would be greatly appreciated and have a great day…

Best Regards,

Michael Mayer
Pittsford, Vermont, USA


PastedGraphic-1.tiff
Last edited by mpmayer0416 on 15 Oct 2022, 19:51, edited 1 time in total.

Dunmunro
Posts: 225
Joined: 10 Jan 2019, 01:11

Re: Selected guide star not showing in Guide Window

Post by Dunmunro » 15 Oct 2022, 15:29

mpmayer0416 wrote:
15 Oct 2022, 12:54

I’m using a QHY5iii485 guider cam and trying to do auto guiding in AA 8 SP2 with the ASCOM camera setup. As shown below, when I select a star in the guide camera image it’s not showing up in the Guide Window. It used to show up as it should. Something has changed somewhere and I’m having no luck solving this issue. Your help would be greatly appreciated and have a great day…

Best Regards,

Michael Mayer
Pittsford, Vermont, USA


PastedGraphic-1.tiff
I think you need to check the visualization settings. You can probably test this using the simulator.

mpmayer0416
Posts: 4
Joined: 09 Sep 2022, 15:46

Re: Selected guide star not showing in Guide Window

Post by mpmayer0416 » 15 Oct 2022, 19:53

Thank you very much for your suggestion. I will get on that right away to see if I can find a solution to this issue. Have a great day!

Post Reply