Nikon D810 and D810A - two camera control

Cameras, telescopes, focusers and other hardware
Post Reply
Dunmunro
Posts: 225
Joined: 10 Jan 2019, 01:11

Nikon D810 and D810A - two camera control

Post by Dunmunro » 28 Feb 2019, 01:09

I have tested the Nikon 1.10 driver and I can control a D810 and a D810A simultaneously using two instances of AA7 32bit (non LAA). I had an ASI 120mm mini using ASCOM running in instance one at the same time.

fabdev
Posts: 461
Joined: 03 Dec 2018, 21:43

Re: Nikon D810 and D810A - two camera control

Post by fabdev » 28 Feb 2019, 02:32

Thanks, may you test with LAA too?
For 20+ megapixels DSLRs, LAA can be useful.

Dunmunro
Posts: 225
Joined: 10 Jan 2019, 01:11

Re: Nikon D810 and D810A - two camera control

Post by Dunmunro » 28 Feb 2019, 03:31

fabdev wrote:
28 Feb 2019, 02:32
Thanks, may you test with LAA too?
For 20+ megapixels DSLRs, LAA can be useful.

You're welcome.

I'll try the LAA version tomorrow.

Dunmunro
Posts: 225
Joined: 10 Jan 2019, 01:11

Re: Nikon D810 and D810A - two camera control

Post by Dunmunro » 03 Mar 2019, 01:41

OK. I tried the LAA version of AA7 and connected the D810A as camera 1 in AA7 instance 1 and the D810 as camera 2 in instance 2 and it worked fine in test mode, with both cameras exposing simultaneously.

Dunmunro
Posts: 225
Joined: 10 Jan 2019, 01:11

Re: Nikon D810 and D810A - two camera control

Post by Dunmunro » 20 Mar 2019, 19:53

Would it be possible to add D800 and D800E support to the driver?

I'd be happy to test it ASAP.

thanks

fabdev
Posts: 461
Joined: 03 Dec 2018, 21:43

Re: Nikon D810 and D810A - two camera control

Post by fabdev » 20 Mar 2019, 21:28

Hello, OK, I will try to make a version for it. Please write me by PM or email.
Fabio.

Dunmunro
Posts: 225
Joined: 10 Jan 2019, 01:11

Re: Nikon D810 and D810A - two camera control

Post by Dunmunro » 22 Mar 2019, 15:18

The Nikon D800 and D800E were successfully tested with the modified Nikon 1.1 driver.

thanks Fabio.

Post Reply