Astroart Forum

This happens even if you select the imaging camera as 1 and the guider as 2 ?

I try to set the number of steps between each focus position so that no position on the focus graph tops or bottoms out.

In the bottom left corner of your flat there are some numbers, B is the background average. For my 16 bit camera I try to get that value between 25,000 and 30,000. In that range my flats correct very well. For a 12 bit camera you will need a lower range. In the AstroArt help topics search for "Flat ...

Welcome to the user forum.
The tutorials are part of the AstroArt guide. It should be included with your AA ver. At least it was with mine.

Many ASCOM mount drivers do not function as a hub and you may need to use ASCOM Device Hub for multiple connections.
Have you used EQMOD with multiple connections before, does it function as a hub?

Hi, if you are guiding with the Loadstar using a cable from the camera to the mount try setting GOTO as "camera 2 relays" and guide as "same connection as GOTO" If you are using ASCOM pulse guiding (no cable) you need to select GOTO as the scopes ASCOM driver "EQmod" or the ASCOM hub that you have E...

It sounds like you haven't installed the ZWO ASCOM Driver? Sharpcap and PHD2 both have native drivers for ZWO, maybe you are connecting thru them.

Hi, if you open camera control - setup tab - scripts - menu - demos then open the Supernova search script.
That should get you a good start.
post back if you have more question.

Thanks Fabio, I'll try this out.

Hi, I have a 4 channel relay with a PIC controller that I want to control from AA script.
Can someone show me how to script this. I'm clueless.
Thanks for any help.

relay #2 on 254 2 1
relay #2 off 254 2 0
baud rate 2400
port 7

Hi Rudi, maybe Fabio could just allow the check box next to the focus section to only enable the focus portion of the sequencer line.

Hi Gerd, I had to look back to ver. 6 to check but I don't see it in 6. Ver. 7 does have the grid.