Astroart Forum

If you will be imaging and guiding with Astroart and you connected to your mount through its ASCOM driver select "camera 2 relays" for guide if you have the guide cable connected to your guide camera. If your guide cable is connected to your imaging camera select "camera 1 relays" for guide. If your...

Hi Joe, I also use a Robo-focus. I'll tell you how I set mine up, that should get you close. If you take an image and you see fairly in focus stars just use the settings you see in the screen shot. If you are out of focus use the manual focus buttons to get close. I have an SCT with the focus motor ...

Here is a screen shot of a dark sequence bin 1x1, just change the name and bin mode to Dark 2x2 and run it a second time.
The camera Temperature and power % is shown in the bottom right corner of the camera control window.

Hi Rudi, just a suggestion. I really like the idea of the sequencer. A few times I requested new features to Fabio and he implemented some of them. Since the sequencer will create a script that will do the same thing I have found it much easier to embellish the script whenever I feel the need for a ...

Just a suggestion check that all three are installed.

Years ago I was setting up a new computer. I had installed the ASCOM platform and the camera driver but not the ASCOM driver for the camera.

When the ASCOM camera chooser window pops up and you select either ASI camera 1 or 2 what happens if you click on "properties"?

When you start your camera (I assume it's an ASCOM driver) you should see the ASCOM camera chooser. The Properties button should open a window with camera controls.

The only list I am aware of, open AstroArt, at the top of the window go to help then help topics then scripts.

On the bottom of the save file window there is a save type drop down to select tif.

Hi Rudi, the center script has been working well for me so far. Here is the script I used for years to center. You can adjust the pause to meet your needs. raOri = Telescope.RA deOri = Telescope.DEC Camera.Binning(3) Camera.Start(5) Camera.Wait ra,de = Image.EstimateRADEC ok = Image.FindCoordinates(...

Did you try selecting star alignment with translation + field rotation?

Look in the AstroArt guide under catalogs for download links.