Astroart Forum

You are correct, I think it was a pre- released I installed that way. The final release did self install on my Windows 11. Maybe Fabio or another user has a suggestion.

I'm using Windows 11 and SP 4 installed fine. I downloaded SP4 and unzipped it then copy and past to AA 8 folder. Could it be you are using the trial version? Maybe that won't let you install a service pack?

Wow, I've been using AA since ver. 2 and never had problems like those. I hope someone has some suggestions that will help.

To control your mount select ASCOM driver. For guiding select same connection as goto for pulse guide or if you are using a guide cable from your camera to your mount select camera 2 for your guide camera or camera 1 if your using the relays from your imaging camera.

I have the same issue?

If you will be imaging and guiding with Astroart and you connected to your mount through its ASCOM driver select "camera 2 relays" for guide if you have the guide cable connected to your guide camera. If your guide cable is connected to your imaging camera select "camera 1 relays" for guide. If your...

Hi Joe, I also use a Robo-focus. I'll tell you how I set mine up, that should get you close. If you take an image and you see fairly in focus stars just use the settings you see in the screen shot. If you are out of focus use the manual focus buttons to get close. I have an SCT with the focus motor ...

Here is a screen shot of a dark sequence bin 1x1, just change the name and bin mode to Dark 2x2 and run it a second time.
The camera Temperature and power % is shown in the bottom right corner of the camera control window.

Hi Rudi, just a suggestion. I really like the idea of the sequencer. A few times I requested new features to Fabio and he implemented some of them. Since the sequencer will create a script that will do the same thing I have found it much easier to embellish the script whenever I feel the need for a ...

Just a suggestion check that all three are installed.

Years ago I was setting up a new computer. I had installed the ASCOM platform and the camera driver but not the ASCOM driver for the camera.

When the ASCOM camera chooser window pops up and you select either ASI camera 1 or 2 what happens if you click on "properties"?

When you start your camera (I assume it's an ASCOM driver) you should see the ASCOM camera chooser. The Properties button should open a window with camera controls.